DRC Series

How-to instruction video for the DEUTSCH DRC Series.


Contact Insertion

  1. Grasp contact approximately 1.00″ (25.4 mm) behind the contact crimp barrel.
  2. Hold connector with rear grommet facing you.
  3. Push contact straight into connector grommet until a positive stop is felt. A slight tug will confirm that it is properly locked in place.

Contact Removal

  1. With rear insert toward you, snap appropriate size extractor tool over the wire of contact to be removed.
  2. Slide tool along wire into the insert cavity until it engages contact and resistance is felt. NOTE: Do not twist or insert tool at an angle
  3. Pull contact-wire assembly out of connector.